Useful Information

List of welding codes
From Wikipedia

American Society of Mechanical Engineers (ASME) Code

Code	Description
ASME BPVC Section II	Part C: Specifications for Welding Rods, Electrodes, and Filler Metals
ASME BPVC Section V	Nondestructive Examination
ASME BPVC Section IX	Welding and Brazing Qualifications
ASME B16.25	Buttwelding ends

American Welding Society (AWS) Standards

Standard Number	Title
AWS A02.4	Standard symbols for welding, brazing, and non-destructive examination
AWS A03.0	Standard welding terms and definitions
AWS A05.1	Specification for carbon steel electrodes for shielded metal arc welding
AWS A05.18	Specification for carbon steel electrodes and rots for gas shielded arc welding
AWS B01.10	Guide for the nondestructive examination of welds
AWS B02.1	Specification for Welding Procedure and Performance Qualification
AWS D01.1	Structural welding (steel)
AWS D01.2	Structural welding (aluminum)
AWS D01.3	Structural welding (sheet steel)
AWS D01.4	Structural welding (reinforcing steel)
AWS D01.5	Bridge welding
AWS D01.6	Structural welding (stainless steel)
AWS D01.7	Structural welding (strengthening and repair)
AWS D01.8	Structural welding seismic supplement
AWS D01.9	Structural welding (titanium)
AWS D08.1	Automotive spot welding
AWS D08.6	Automotive spot welding electrodes supplement
AWS D08.7	Automotive spot welding recommendations supplement
AWS D08.8	Automotive arc welding (steel)
AWS D08.9	Automotive spot weld testing
AWS D08.14	Automotive arc welding (aluminum)
AWS D09.1	Sheet metal welding
AWS D10.10	Heating practices for pipe and tube
AWS D10.11	Root pass welding for pipe
AWS D10.12	Pipe welding (mild steel)
AWS D10.13	Tube brazing (copper)
AWS D10.18	Pipe welding (stainless steel)
AWS D11.2	Welding (cast iron)
AWS D14.1	Industrial mill crane welding
AWS D14.3	Earthmoving & agricultural equipment welding
AWS D14.4	Machinery joint welding
AWS D14.5	Press welding
AWS D14.6	Industrial mill roll surfacing
AWS D15.1	Railroad welding
AWS D15.2	Railroad welding practice supplement
AWS D16.1	Robotic arc welding safety
AWS D16.2	Robotic arc welding system installation
AWS D16.3	Robotic arc welding risk assessment
AWS D16.4	Robotic arc welder operator qualification
AWS D17.1	Aerospace fusion welding
AWS D17.2	Aerospace resistance welding
AWS D18.1	Hygienic tube welding (stainless steel)
AWS D18.2	Stainless steel tube discoloration guide
AWS D18.3	Hygienic equipment welding
The zero after the first letter is only placed there so the table can be sorted. i.e. D01.1 is actually D1.1).

American Petroleum Institute (API) Standards

Standard Number	Description
API RP 577	Welding Inspection and Metallurgy
API 1104	Welding of piplelines and related facilities

Australian / New Zealand (AS/NZS) Standards

Standard Number	Description
AS/NZS 1554.1	Structural steel welding - Welding of steel structures
AS/NZS 1554.2	Structural steel welding - Stud welding (steel studs to steel)
AS/NZS 1554.3	Structural steel welding - Welding of reinforcing steel
AS/NZS 1554.4	Structural steel welding - Welding of high strength quenched and tempered steels
AS/NZS 1554.5	Structural steel welding - Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1554.6	Structural steel welding - Welding stainless steels for structural purposes
AS/NZS 1554.7	Structural steel welding - Welding of sheet steel structures
AS/NZS 3992	Pressure equipment - Welding and brazing qualification

Canadian Standards Association (CSA) Standards

Standard Number	Description
CAN/CSA-G401-07	Corrugated Steel Pipe Products
CAN/CSA-ISO 14341:11	Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels -
CAN/CSA-W117.2-06 (R2011)	Safety in Welding, Cutting and Allied Processes
G40.20-04/G40.21-04 (R2009)	General Requirements for Rolled or Welded Structural Quality Steel/ Structural Quality Steel
W178.1-08	Certification of Welding Inspection Organizations
W178.2-08	Certification of Welding Inspectors
W47.1-09	Certification of companies for fusion welding of steel
W47.2-11	Certification of companies for fusion welding of aluminum
W48-06 (R2011)	Filler Metals and Allied Materials for Metal Arc Welding
W55.3-08	Certification of companies for resistance welding of steel and aluminum
W59-03 (R2008)	Welded Steel Construction (Metal Arc Welding)
W59.2-M1991 (R2008)	Welded Aluminum Construction

British Standards (BS)

Standard Number	Description
BS 0499-1	Welding terms and symbols. Glossary for welding, brazing and thermal cutting
BS 0499-2C	Welding terms and symbols. European arc welding symbols in chart form
BS 2633	Specification for Class I arc welding of ferritic steel pipework for carrying fluids
BS 2971	Specification for class II arc welding of carbon steel pipework for carrying fluids
BS 4515-1	Specification for welding of steel pipelines on land and offshore - Part 1: Carbon and carbon manganese steel pipelines
BS 4515-2	Specification for welding of steel pipelines on land and offshore. Duplex stainless steel pipelines
PD 6705-2	Structural use of steel and aluminium. Recommendations for the execution of steel bridges to BS EN 1090-2
PD 6705-3	Structural use of steel and aluminium. Recommendations for the execution of aluminium structures to BS EN 1090-3

International Organization for Standardization (ISO) Standards

Standard Number	Description
ISO 13847	Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines
ISO 13916	Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat mainteanance temperature
ISO 13918	Welding - Studs and ceramic ferrules for arc stud welding
ISO 13919-1	Welding - Electron and laser-beam welded joints - Guidance on quality level for imperfections - Part 1: Steel
ISO 13919-2	Welding - Electron and laser-beam welded joints - Guidance on quality level for imperfections - Part 2: Aluminium and its weldable alloys
ISO 13920	Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position
ISO 14112	Gas welding equipment - Small kits for gas brazing and welding
ISO 14175	Welding consumables — Gases and gas mixtures for fusion welding and allied processes. Replaced EN 439:1994 in Europe.
ISO 14341	Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
ISO 14554	Resistance welding
ISO 14744	Electron beam welding, six parts
ISO 15607	Specification and qualification of welding procedures for metallic materials - General rules
ISO 15609	Specification and qualification of welding procedures for metallic materials - Welding procedure specification, five parts.
ISO 15610	Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
ISO 15611	Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
ISO 15612	Specification and qualification of welding procedures for metallic materials — Qualification by adoption of a standard welding procedure
ISO 15613	Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test
ISO 15614	Specification and qualification of welding procedures for metallic materials - Welding procedure test, 13 parts.
ISO 17635	Non-destructive testing of welds. General rules for metallic materials
ISO 2560	Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
ISO 3580	Covered electrodes for manual arc welding of creep-resisting steels - Code of symbols for identification
ISO 3581	Covered electrodes for manual arc welding of stainless and other similar high alloy steels - Code of symbols for identification
ISO 3834	Quality requirements for fusion welding of metallic materials, five parts.
ISO 4063	Welding and allied processes - Nomenclature of processes and reference numbers
ISO 5817	Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections
ISO 6520-1	Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding
ISO 6520-2	Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure
ISO 6947	Welds. Working positions. Definitions of angles of slope and rotation
ISO 9606	Qualification test of welders — Fusion welding, parts 1 to 5
ISO 9692-1	Welding and allied processes. Recommendations for joint preparation. Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
ISO 9692-2	Welding and allied processes. Joint preparation. Submerged arc welding of steels
ISO 9692-3	Welding and allied processes. Joint preparation. Part 3: TIG and MIG welding of aluminium and its alloys
ISO/TR 15608	Welding - Guidelines for a metallic material grouping system
ISO/TR 20172	Welding — Grouping systems for materials — European materials
ISO/TR 20173	Welding — Grouping systems for materials — American materials
ISO/TR 20174	Welding — Grouping systems for materials — Japanese materials

European Union (CEN) standards

Standard Number	Description
EN 287-1	Qualification test of welders — Fusion welding — Part 1: Steels[8]
EN 1090-1	Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1090-2	Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
EN 1090-3	Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 1011-1	Welding — Recommendations for welding of metallic materials — Part 1: General guidance for arc welding
EN 1011-2	Welding — Recommendations for welding of metallic materials — Part 2: Arc welding of ferritic steels
EN 1011-3	Welding — Recommendations for welding of metallic materials — Part 3: Arc welding of stainless steels
EN 1011-4	Welding — Recommendations for welding of metallic materials — Part 4: Arc welding of aluminium and aluminium alloys
EN 1011-5	Welding. Recommendations for welding of metallic materials. Welding of clad steel
EN 1011-6	Welding. Recommendations for welding of metallic materials. Laser beam welding
EN 1011-7	Welding — Recommendations for welding of metallic materials — Part 7: Electron beam welding
EN 1011-8	Welding. Recommendations for welding of metallic materials. Welding of cast irons
EN 1993-1-8	Eurocode 3: Design of steel structures – Part 1-8: General – Design of joints
EN 13133	Brazing - Brazer approval
EN 22553	Welded, brazed and soldered joints – Symbolic representation on drawings

References:

1.  "American Welding Society - Technical". American Welding Society. Retrieved 7 November 2011.
2.  "American Petroleum Institute Standards". American Petroleum Institute. Retrieved 7 November 2011.
3.  "Standards Development". Standards Australia. Retrieved 7 November 2011.
4.  "About CSA". Canadian Standards Association. Retrieved 7 November 2011.
5.  "BSI Standards". BSI Standards. Retrieved 7 November 2011.
6.  "ISO Standards". International Organization for Standardization. Retrieved 7 November 2011.
7.  "About us". European Committee for Standardization (CEN). Retrieved 7 November 2011.
8.  The 2004 version of this CEN standard was introduced in place of ISO 9606-1, which was not accepted by the ISO committee due to reactions by USA and Canada. See Davis, A.: "Welder Qualification Standards - Philosophy and Feedback", AWS Welding Journal, July 2003, pp. 14–16.
9.  "NA 092 Welding and allied processes Standards Committee". DIN. Retrieved 7 November 2011.